Home > L/T SUSPENSION > Chevy/GMC > 1982 - 2004 S10 / Sonoma > 2WD
Sort By:
Page of 1
Chevy S10 4.3 V6 Motor Mount
Our Price: $150.00

Upgrade your stock 4.3L 6 cylinder motor mounts with C4 Fabworks!  These mounts use polyurethane bushings, and are made of high quality 3/16" steel.  They are designed for off-road driving and racing stress. Replace them now on your S10 before breaking a stock one off-road and causing major engine damage! This is one of our most popular products, and have been proven through off-road use, drag racing trucks, 4.3L use in hot rods and transplants, and high-mileage stock trucks. Buy your last set of motor mounts from us!
S10 Lower Arm Frame Brace
Our Price: $260.00

This frame brace is a must for any S10 that sees the dirt. Without using this brace tearing the rear lower arm mount from the frame is fairly common. This brace fixes that by tying all four of the lower A arm mounting points together keeping the frame rigid and greatly strengthening the weak rear A arm mounts.

Our polyurethane motor mounts are recommended when to be used in conjunction with this brace to avoid oil pan contact during extreme off roading.
Chevy S10 Stage 2 Weld-It-Yourself Lower Arm Kit
Our Price: $750.00

Are you a competent welder or garage fabricator, and have an S10, but don't know where to start building your own coilover long travel kit? We've got you covered! Start with the Baja Customs Stage 2 Weld-It-Yourself Lower Arm Kit. These are the same lower arms from our Stage 2 Long Travel kit, available 5" or 6" wider than stock, with a 1.5" lower uniball for insane strength and reliability. These lower arms utilize your stock lower arm mount. They are laser cut, and come with all necessary hardware. Lay them out, weld them up, and you have a great starting point for building your own upper arm and spindle!
The Kit includes:
  • Laser cut lower arms ready for assembly
  • Plates, gussets, and weld washers
  • Bushing housings and crush sleeves
  • Delrin bushings w/ Grade 8 hardware
  • 1.5" uniball cups
Chevy S10 Fabricated Spindle/Upright
Our Price: $1,400.00

Overview:

Coming Soon

Features:
100% bolt on
1" vertical upper uniball
Compatible with Dana 44 hubs
Constructed out of 3/16" cold roll plate
TIG and MIG welded

Includes:
(2) Fabricated spindles/uprights
(2) 1" FK uniballs
Grade 8 hardware

Chevy S10 Rear Cantilever Kit
Our Price: $1,800.00

Overview:
Coming Soon

Features:
Coming Soon

Includes:
Coming Soon

Chevy S10 Stage 1 L/T Coil Bucket Kit
Our Price: $2,000.00

This Chevy S10 Stage 1 Long Travel Coil Bucket kit is the most cost effective way to strengthen your stock S10 suspension, and get it ready for some serious pre-running.

Chevy S10 Stage 2 L/T Coilover Kit
Our Price: $2,800.00

Ready for high performance desert-proven coilover long travel for your S10? This is what you've been waiting for! The C4 Stage 2 kit is a professional off-road suspension kit, making your S10 front end borderline race ready. With our future optional fabricated spindle you will be in business for race use. For prerunners that sees heavy duty desert use and lots of airtime, the Stage 2 kit is a must. This kit is designed with super strong 1.5" upper and lower uniballs, and is 6" wider than the stock suspension. Fiberglass fenders are a must with this setup.
This kit includes:
  • Up to 16" of suspension travel
  • Upper boxed control arms
  • Lower boxed control arms
  • (4) 1.5" uniballs with high misalignment spacers
  • (4) 3/4" heim joints for upper arm pivot
  • Delrin bushings and crush sleeves
  • 4130 tie rods including (2) right & (2) left 3/4" heim joints
  • Grade 8 & 9 hardware
  • In frame coil bucket boxing inserts with upper arm mounts
Chevy S10 Stage 3 L/T Coilover Kit
Our Price: $3,900.00

Overview:
Coming Soon

Features:
Coming Soon

Includes:
Upper control arms
Lower control arms
Spindles/uprights
Tie rods
Grade 8 hardware